- 1 How is double bass made?
- 2 How has the double bass evolved?
- 3 Why do they call it a double bass?
- 4 How long does it take to build a double bass?
- 5 Is Double Bass difficult?
- 6 Who is the best double bass player?
- 7 How old is the bass instrument?
- 8 What was the first bass?
- 9 How loud is a double bass?
- 10 Is there a difference between a bass and a double bass?
- 11 What do you call a double bass player?
- 12 How much does a good double bass cost?
- 13 How thick is the top layer of a double bass?
- 14 What is harder to play violin or viola?
- 15 How long does it take to make an upright bass?
How is double bass made?
How it is made. The double bass is usually made from wood. Double basses have a hollow wooden body which helps to amplify the sounds of the instrument. A wooden neck is attached to the body, and a flat wooded fingerboard is glued onto the neck.
How has the double bass evolved?
When these wound bass strings became more prevalent, many bass players had the necks reset on their older double basses so that the strings could be set up closer to the fingerboard. Thanks to the advances with the steel wound bass strings, the playing style on the double bass also began to evolve during this time.
Why do they call it a double bass?
The double bass is the largest and lowest-pitched bowed string instrument in the modern symphony orchestra. The origin of the name of the double bass stems from the fact that its initial function was to double the bass line of large ensembles.
How long does it take to build a double bass?
* build using semi-rough lumber (i.e. I purchased a body blank set or a BM top set) is in the 40 – 60 hour range depending on the extent of how custom the bass is. the time aspect is all about level of detail.
Is Double Bass difficult?
The double bass is a tough master – demanding strength, stamina and proper technique from its player. As the root of the orchestra, musical and rhythmic accuracy are imperative to the success of the whole – requiring plenty of practice and repetition.
Who is the best double bass player?
Double Bass Artists
- Charles Mingus. 767,479 listeners.
- Upgrade Now.
- Marc Johnson. 49,240 listeners.
- Ray Brown. 38,342 listeners.
- Charlie Haden. 111,904 listeners.
- Edgar Meyer. 70,225 listeners.
- Upgrade Now.
- Paul Chambers. 46,744 listeners.
How old is the bass instrument?
It was first developed in 16th century Europe.
What was the first bass?
In the 1950s, Leo Fender and George Fullerton developed the first mass-produced electric bass guitar. The Fender Electric Instrument Manufacturing Company began producing the Precision Bass, or P- Bass, in October 1951.
How loud is a double bass?
Results, at the average note, were as follows: violin, 85.9 db: viola, 79.5 db: cello, 76.52 db: double bass, 75.97 db.
Is there a difference between a bass and a double bass?
The difference between a bass guitar and a double bass is that the bass guitar is smaller, it’s held perpendicular to the player’s body, it’s often amplified via a bass amplifier, and it’s played with fingers or a pick. Double basses are larger, they’re stood upright, and they can be played with a bow.
What do you call a double bass player?
A person who plays this instrument is called a ” bassist “, ” double bassist “, ” double bass player “, “contrabassist”, ” contrabass player ” or ” bass player “. The double bass is sometimes confusingly called the violone, bass violin or bass viol.
How much does a good double bass cost?
Hybrid double basses are ideal for those looking to spend less than $3000 on a double bass. Fully carved double basses are the most expensive, costing anywhere from a few thousand dollars to hundreds of thousands.
How thick is the top layer of a double bass?
The thickest part is under the G foot, above the post between 7-10mm. The chest area is then slightly thinner 6-9mm, then it becomes thinner in the upper and lower bouts 4-7mm.
What is harder to play violin or viola?
Contrary to popular belief, playing the viola is actually harder than playing the violin. Overall, it is harder to make a good sound on the viola than it is on the violin because of its larger size, but the sound when it comes out is gorgeously rich and full.
How long does it take to make an upright bass?
Learning the Craft The process of turning raw wood into a finished double bass typically takes Lloyd six weeks. This puts him on track to make around six custom basses a year with a backlog of four months worth of work.