How far apart should double bass pedals be?

Beater distance should be about 1 1/2″ to 2 inches from the head in a rest state. Adjust the angles and tension to accomplish that position. You will have 3 adjustments to experiment with pedal tension, beater angle, and footboard height.

How do double kick pedals work?

In order to play “doubles” on the pedal, drummers can employ 3 main techniques: slide, swivel, or heel-toe. In the slide technique, the pedal is struck around the middle area with the ball of the foot. As the drum produces a sound, the toe is slid up the pedal.

How far should the beater be from the bass drum?

I’d recommend starting by placing your bass drum pedal into position (there’s usually a slot under your bass drum. Then measure a distance of about 3 inch (about 8 cm) or have your beater set at an angle that’s about 45°.

How do you adjust the angle on a bass drum?

Adjust the angle of the beater by loosening the beater angle cam adjustment square or Allen key bolt (fig 2) then tighten it back up. It’s best to make fine adjustments as too much adjustment either way will prevent the beater from striking the head.

How do you adjust a DW 3000 double bass pedal?

To increase or decrease the spring tension, loosen the round knurled nut at the base of the spring assembly and pull down on the spring to release the locking hex nut. Tighten or loosen the lock nut to create the desired tension, then release the hex nut and retighten the knurled nut to lock in the adjustment.

You might be interested:  FAQ: What Drummer Has The First Double Bass Pedals?

Why is my bass drum moving?

Kick Drum Anchor Solutions: Stop Your Bass Drum From Sliding Forward. It could be for many reasons: you aren’t using a drum rug, your bass drum spurs aren’t setup properly, your kick pedal isn’t attached and seated well to the kick drum, and/or many other reasons.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *