Where do I put my double kick pedals?

So, how do you set up a drum set with a double bass pedal? The traditional setup is to attach the primary pedal to the bass drum as you would a single pedal and to place the second, slave pedal just to the right of the hi hat stand’s pedal board.

How far apart should my double bass pedals be?

Beater distance should be about 1 1/2″ to 2 inches from the head in a rest state. Adjust the angles and tension to accomplish that position. You will have 3 adjustments to experiment with pedal tension, beater angle, and footboard height.

How does a double kick pedal work?

In order to play “doubles” on the pedal, drummers can employ 3 main techniques: slide, swivel, or heel-toe. In the slide technique, the pedal is struck around the middle area with the ball of the foot. As the drum produces a sound, the toe is slid up the pedal.

How do you adjust the height of a footboard?

1.2: Footboard Angle To change the footboard height and angle, loosen the adjusting key screw on the top of the Rotor and slide the chain or strap forward or backward to achieve the desired footboard height. Then tighten the adjusting key screw.

You might be interested:  Quick Answer: How To Replace Double Bass Bridge?

How far should the beater be from the bass drum?

I’d recommend starting by placing your bass drum pedal into position (there’s usually a slot under your bass drum. Then measure a distance of about 3 inch (about 8 cm) or have your beater set at an angle that’s about 45°.

Why is my bass drum moving?

Kick Drum Anchor Solutions: Stop Your Bass Drum From Sliding Forward. It could be for many reasons: you aren’t using a drum rug, your bass drum spurs aren’t setup properly, your kick pedal isn’t attached and seated well to the kick drum, and/or many other reasons.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *