How do I fix the bridge on my double bass?

The movement is generally slight and can be remedied by carefully pushing the top of the bridge toward the tailpiece until you regain your 90 degree angle between the underside of the bridge and the top of the bass. The feet of the bridge should be flush with the top of the instrument.

How do you set a double bass sound post?

In the “textbook” position, ideally the sound post is positioned centered behind the G-string foot of the bridge, approximately 12 to 14mm or 1/2″ to 3/4″ away from the backside of the bridge, favoring the tailpiece.

How high should the action be on a double bass?

I generally recommend 4-7mm for an easy height. Of course, basses all respond in their own way as so do player’s styles.

How do you measure string height on a double bass?

The measurement (in millimetres) is taken at the end of the fingerboard. It’s the distance from the underside of the string to the surface of the fingerboard. Not all basses have the same length fingerboards though, so it can only be used as a rough guide.

You might be interested:  FAQ: How To Make A Double Bass At Home?

What is the best bass bridge?

Best Bass Bridge Review

  • Hipshot KickAss High-mass Bass Bridge for 5-bolt Fender — Best Bass Guitar Bridge.
  • Fender HiMass 4-String Bass Bridge Assembly with Zinc Saddles — Best Bridge for Fender Jazz Bass.
  • Hipshot Brass A-Style Bass Bridge Mount 1 – No String Through — Best Jazz Bass Bridge.

How does a bass bridge work?

Bridge. The bridge, or tailpiece, is a critical part of the bass. It is the metal plate where the strings attach to the body. This important contact point is where much of the strings’ vibration is transferred to the body of the bass guitar.

What is a sound post on a double bass?

A sound post is a piece of doweling wood often made from seasoned spruce which is held in place, under the tension produced by the strings and the bridge. A peek through the f-holes on the bass and you’ll see the post vertically placed between the front and back of the bass body.

Where should the sound post be on a bass?

As a general rule, the soundpost is usually centered behind the treble or G foot side of the bridge and placed approximately 2 to 2.8 cm behind the back side of this bridge foot (see diagram). Every instrument reacts differently, so wood type and density of the soundpost will create different results from bass to bass.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *