Where do I put my double kick pedals?

So, how do you set up a drum set with a double bass pedal? The traditional setup is to attach the primary pedal to the bass drum as you would a single pedal and to place the second, slave pedal just to the right of the hi hat stand’s pedal board.

How far apart should my double bass pedals be?

Beater distance should be about 1 1/2″ to 2 inches from the head in a rest state. Adjust the angles and tension to accomplish that position. You will have 3 adjustments to experiment with pedal tension, beater angle, and footboard height.

Should I get a double bass pedal?

Double Pedal is rarely a necessity unless you’re playing the extreme forms of metal. Still, if you ever hear tasteful use of double bass playing it can make you want to get one.

Should I get a double bass drum pedal?

Double pedal technique requires a big investment of time to master, If you are a session musician you will possibly use it, but If its not something you require for the music you play then the time could be better used perfecting the style of drumming you like and use. If its something you want to get into then do it.

You might be interested:  Often asked: What Is A Double Bass Drum Pedal?

What is the best double bass pedal for the money?

6 Best Double Bass Pedals for 2021

  • 1 DW 9000 Double Pedal Extended Footboard: Best Option for Beginners.
  • 2 DW Pedals: Machined Chain Drive Double Pedal: Best for Experienced Drummers.
  • 3 Tama Dyna-Sync Double Pedal: Best for Customizable Features.
  • 4 Tama Speed Cobra 910 Twin Pedal: Best for Speed.

How can I increase my double kick speed?

Practice Key

  1. Use the heel-toe technique to practice the above exercise with each foot separately.
  2. Play a heel stroke for every written “H” and a toe stroke for every written “T”
  3. Start very slowly and increase your speed only after your control increases.

What does a double bass pedal do?

A double bass drum pedal operates much the same way only with a second footplate controlling a second beater on the same drum. Most commonly this is attached by a shaft to a remote beater mechanism alongside the primary pedal mechanism.

How far should the beater be from the bass drum?

I’d recommend starting by placing your bass drum pedal into position (there’s usually a slot under your bass drum. Then measure a distance of about 3 inch (about 8 cm) or have your beater set at an angle that’s about 45°.

How do you adjust the angle on a bass drum?

Adjust the angle of the beater by loosening the beater angle cam adjustment square or Allen key bolt (fig 2) then tighten it back up. It’s best to make fine adjustments as too much adjustment either way will prevent the beater from striking the head.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *