- 1 How high should the action be on a double bass?
- 2 How do you set a double bass sound post?
- 3 What is the tuning for a double bass?
- 4 Does a double bass have a high or low frequency?
- 5 How high should my bass strings be?
- 6 How do you reset a bass bridge?
- 7 How do you adjust a bass sound post?
- 8 What is a 3/4 double bass?
- 9 Why do they call it a double bass?
- 10 Does Double Bass have fine tuners?
- 11 Which frequency is best for bass?
- 12 What is a good frequency response for bass?
- 13 What is the lowest bass frequency?
How high should the action be on a double bass?
I generally recommend 4-7mm for an easy height. Of course, basses all respond in their own way as so do player’s styles.
How do you set a double bass sound post?
In the “textbook” position, ideally the sound post is positioned centered behind the G-string foot of the bridge, approximately 12 to 14mm or 1/2″ to 3/4″ away from the backside of the bridge, favoring the tailpiece.
What is the tuning for a double bass?
The standard tuning (lowest-pitched to highest-pitched) for bass is E–A–D–G, starting from E below second low C (concert pitch). This is the same as the standard tuning of a bass guitar and is one octave lower than the four lowest-pitched strings of standard guitar tuning.
Does a double bass have a high or low frequency?
Modern double basses are usually tuned ( low to high ) E-A-D-G. The lowest string is tuned to E (the same pitch as the lowest E on a modern piano, approx 41 Hz), nearly 3 octaves below middle C ); and the highest string is tuned to G, an octave and a fourth below middle C (approx 98 Hz).
How high should my bass strings be?
To begin, measure the string height at the 12th fret from the top of the fret to the bottom of the string. For a middle-of-the road action, set the bass side of a 4- string (the E string in standard tuning) to 7/64″ and then set the treble side (G string ) to 5/64″.
How do you reset a bass bridge?
The movement is generally slight and can be remedied by carefully pushing the top of the bridge toward the tailpiece until you regain your 90 degree angle between the underside of the bridge and the top of the bass. The feet of the bridge should be flush with the top of the instrument.
How do you adjust a bass sound post?
As a general rule, the soundpost is usually centered behind the treble or G foot side of the bridge and placed approximately 2 to 2.8 cm behind the back side of this bridge foot (see diagram). Every instrument reacts differently, so wood type and density of the soundpost will create different results from bass to bass.
What is a 3/4 double bass?
3/4 size is recognized as a regular size bass. There are also double basses that have 5 strings with a low C to make it easier for the player to play notes lower than the low E.
Why do they call it a double bass?
The double bass is the largest and lowest-pitched bowed string instrument in the modern symphony orchestra. The origin of the name of the double bass stems from the fact that its initial function was to double the bass line of large ensembles.
Does Double Bass have fine tuners?
Unlike other instruments in the violin family, the four string double bass is tuned in fourths, not fifths. It is simply one step higher than standard tuning, resulting in F#, B, E, A. You can also utilize the fifths tuning, one octave below the cello.
Which frequency is best for bass?
A 20-120 Hz rating is best for bass in most subwoofers. The lower the Hz, the more is the bass you can get. Some of the best subwoofers in the market have this Hz range. If you are buying a subwoofer that has a fixed Hz rating, you should ensure it is lower than 80 Hz if the bass is important to you.
What is a good frequency response for bass?
These aren’t fixed definitions, but typically bass accounts for frequencies between 20 and 300 Hz, mid is 300 Hz to 4 kHz, and treble counts as anything above 4 kHz, very roughly speaking. Frequency Response describes the range of frequencies or musical tones a component can reproduce.
What is the lowest bass frequency?
Sub- bass sounds are the deep, low -register pitches below approximately 60 Hz (C2 in scientific pitch notation) and extending downward to include the lowest frequency humans can hear, approximately 20 Hz (E).