Where should a double kick pedal go?

So, how do you set up a drum set with a double bass pedal? The traditional setup is to attach the primary pedal to the bass drum as you would a single pedal and to place the second, slave pedal just to the right of the hi hat stand’s pedal board.

What does a double bass pedal do?

A double bass drum pedal operates much the same way only with a second footplate controlling a second beater on the same drum. Most commonly this is attached by a shaft to a remote beater mechanism alongside the primary pedal mechanism.

How do you adjust a DW 3000 double bass pedal?

To increase or decrease the spring tension, loosen the round knurled nut at the base of the spring assembly and pull down on the spring to release the locking hex nut. Tighten or loosen the lock nut to create the desired tension, then release the hex nut and retighten the knurled nut to lock in the adjustment.

How do you adjust the angle on a kick pedal?

Re: how to adjust angle of beater on kick You just loosen the screw with a drum key, and move the cam (holding on to the beater makes it easier to get the cam adjusted since the whole axle will turn also), then tighten back down. These should be on both sides of the main pedal. Hope this helps!

You might be interested:  Question: How To Set A Hihat Cymbal Stand Up With A Double Bass Drum?

How far should the beater be from the bass drum?

I’d recommend starting by placing your bass drum pedal into position (there’s usually a slot under your bass drum. Then measure a distance of about 3 inch (about 8 cm) or have your beater set at an angle that’s about 45°.

What is the best double bass pedal?

View The Best Double Bass Pedal Below

  1. Pearl P932 Demonator. Check Amazon Price.
  2. DW 9000. Check Amazon Price.
  3. TAMA Iron Cobra 200. Check Amazon Price.
  4. Pearl P3002D Eliminator Demon Drive. Check Amazon Price.
  5. Drum Workshop Inc. DWCP3002.
  6. Pearl P2052C Eliminator.
  7. Tama HP600DTW Iron Cobra 600.
  8. Mapex Armory Series P800TW.
Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *