How do you mic a double bass?

Microphone positioning The spot under the bridge, between the strings and the deck, is a good position to mount a microphone. This position represents most of the elements of the bass sound we want to capture – low end as well as ‘bite’ when the strings are plucked or bowed.

How do I set up Shure SM57?


  1. Aim the microphone toward the desired sound source (such as the talker, singer, or instrument) and away from unwanted sources.
  2. Place the microphone as close as practical to the desired sound source.
  3. Work close to the microphone for extra bass response.
  4. Use only one microphone to pick up a single sound source.

Why is my SM57 so quiet?

The reason your SM57 is quiet is because it is not a high output microphone (sensitivity is about -57dB) and you do not have an adequate preamp in your system.

Will phantom power damage an SM57?

The SM57 is a dynamic microphone. A professional, balanced, dynamic microphone will not be damaged by phantom power.

What’s the difference between a cello and an upright bass?

Although the cello and double bass are the largest instruments in the string family, there is a substantial difference in their size. The double bass measures in at about 6 feet long and is the largest instrument in the string family, while the cello is slightly smaller in nature.

You might be interested:  Question: Why Are Double Bass Pedals So Expensive?

How do you mic a grand piano?

There is no single correct way to mic up a piano. You can use a variety of techniques to capture your instrument’s wide range of tones. Probably the most popular microphone technique for grand piano involves positioning a pair of small-diaphragm omnidirectional mics directly over the strings, just past the hammers.

Which is better Shure SM57 or SM58?

The 57 and 58 microphones are actually based on the same cartridge design. The main difference is in the grille. The distance from the top of the grille to the diaphragm is shorter on the SM57 compared to that of the SM58, which allows for a more pronounced proximity effect through closer mic positioning.

What do I need for a Shure SM57?

Requirements for the Shure SM57 Whether you’re recording in a studio or on stage, you’ll need a mic stand. An XLR cable is also required. Those using a guitar amplifier need an XLR cable that terminates in a ¼” plug.

Is SM57 good for vocals?

The SM57 Can Be Used on Studio Vocals. You can definitely record excellent-sounding vocals with an SM57 if you know what you’re doing. In some cases, an SM57 might even give you better results than a LDC microphone costing 20x more.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *