How do you set up a double bass drum set?

Method 1: Mount two toms on each bass drum using your hardware. Method 2: Mount one tom on each bass drum and mount up to two additional toms on a stand in between the bass drums. Method 3: Mount as many toms as you want on a rack placed in front of the kit. Attach your other desired cymbals to their stands.

Where should I put my double bass pedal?

So, how do you set up a drum set with a double bass pedal? The traditional setup is to attach the primary pedal to the bass drum as you would a single pedal and to place the second, slave pedal just to the right of the hi hat stand’s pedal board.

How far apart should double bass pedals be?

Beater distance should be about 1 1/2″ to 2 inches from the head in a rest state. Adjust the angles and tension to accomplish that position. You will have 3 adjustments to experiment with pedal tension, beater angle, and footboard height.

How far should the beater be from the bass drum?

I’d recommend starting by placing your bass drum pedal into position (there’s usually a slot under your bass drum. Then measure a distance of about 3 inch (about 8 cm) or have your beater set at an angle that’s about 45°.

You might be interested:  Often asked: When Was The Double Bass?

Should I get a double bass drum pedal?

Double pedal technique requires a big investment of time to master, If you are a session musician you will possibly use it, but If its not something you require for the music you play then the time could be better used perfecting the style of drumming you like and use. If its something you want to get into then do it.

Should I get a double bass pedal?

Double Pedal is rarely a necessity unless you’re playing the extreme forms of metal. Still, if you ever hear tasteful use of double bass playing it can make you want to get one.

How do double kick pedals work?

In order to play “doubles” on the pedal, drummers can employ 3 main techniques: slide, swivel, or heel-toe. In the slide technique, the pedal is struck around the middle area with the ball of the foot. As the drum produces a sound, the toe is slid up the pedal.

How do you adjust the angle on a bass drum?

Adjust the angle of the beater by loosening the beater angle cam adjustment square or Allen key bolt (fig 2) then tighten it back up. It’s best to make fine adjustments as too much adjustment either way will prevent the beater from striking the head.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *