How do you set up a double bass drum set?

Method 1: Mount two toms on each bass drum using your hardware. Method 2: Mount one tom on each bass drum and mount up to two additional toms on a stand in between the bass drums. Method 3: Mount as many toms as you want on a rack placed in front of the kit. Attach your other desired cymbals to their stands.

Where do I put my double bass pedal?

So, how do you set up a drum set with a double bass pedal? The traditional setup is to attach the primary pedal to the bass drum as you would a single pedal and to place the second, slave pedal just to the right of the hi hat stand’s pedal board.

How does a double kick pedal work?

This feat in pedal technology works just like a regular pedal except that a second base plate is attached by a rod to a separate beater mechanism, which operates alongside the primary beater. Like earlier double bass setups, double pedals require both feet to operate.

Should I get a double bass drum pedal?

Double pedal technique requires a big investment of time to master, If you are a session musician you will possibly use it, but If its not something you require for the music you play then the time could be better used perfecting the style of drumming you like and use. If its something you want to get into then do it.

You might be interested:  Often asked: What Is A Double Bass Made Of?

Should I get a double bass pedal?

Double Pedal is rarely a necessity unless you’re playing the extreme forms of metal. Still, if you ever hear tasteful use of double bass playing it can make you want to get one.

What does a double bass pedal do?

A double bass drum pedal operates much the same way only with a second footplate controlling a second beater on the same drum. Most commonly this is attached by a shaft to a remote beater mechanism alongside the primary pedal mechanism.

How far should the beater be from the bass drum?

I’d recommend starting by placing your bass drum pedal into position (there’s usually a slot under your bass drum. Then measure a distance of about 3 inch (about 8 cm) or have your beater set at an angle that’s about 45°.

How do you adjust the angle on a bass drum?

Adjust the angle of the beater by loosening the beater angle cam adjustment square or Allen key bolt (fig 2) then tighten it back up. It’s best to make fine adjustments as too much adjustment either way will prevent the beater from striking the head.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *