How high should the action be on a double bass?

I generally recommend 4-7mm for an easy height. Of course, basses all respond in their own way as so do player’s styles.

Is the action on my bass too high?

The only thing that will really tell you if the action is too high is how comfortable it is to play. If it feels like it’s hard to move around because of the effort of fretting then it is probably too high for you. That being said, if you are fairly new to bass that might not be a good way to judge.

How can I lower my bass action without fret buzz?

the only way to get rid of the frets buzzing is to set them about 50mm over the board. which obviously is way too high. i like my bass setup pretty much as low as it can get. i’ve experimented with shimming the neck, but it hasn’t really helped.

Should I lower the action on my bass?

If your bass does not have individual saddle height adjusting screws, you must adjust the action by raising or lowering the entire bridge.

You might be interested:  Often asked: How To Setup Double Bass Pedal Hi-hat?

How high should my bass action be?

A good rule of thumb is that you can get away with about 1/64 of an inch lower action on the highest-pitched string than what you’ve set your lowest pitched string to.

How do you lower the strings on a double bass?

Lowering the bridge will reduce the distance between the strings and the fingerboard, thereby making the action lower. If you don’t have an adjustable bridge then you will need to cut your bridge down, or possibly get an entirely different bridge.

How tall is a full size double bass?

The double bass stands around 180 cm (6 feet) from scroll to endpin. However, other sizes are available, such as a 1⁄2 or 3⁄4, which serve to accommodate a player’s height and hand size.

Why is my bass action so high?

If there is a bow in the neck, the action will appear higher at higher frets. If you lower the saddles in order to fix that high action, you will get fret buzz at the lower frets. If the frets are straight, try adjusting the action at the bridge.

How do I adjust my bass neck?

To adjust the action, turn the screw in the truss rod to change the curvature of the neck. If the gap is too large, insert the Allen wrench or Phillips screwdriver into the screw (located either on the headstock or at the other end of the neck ) and then tighten the truss rod by turning the screw clockwise.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *