How far apart should my double bass pedals be?

Beater distance should be about 1 1/2″ to 2 inches from the head in a rest state. Adjust the angles and tension to accomplish that position. You will have 3 adjustments to experiment with pedal tension, beater angle, and footboard height.

How do you set up a double bass drum set?

Method 1: Mount two toms on each bass drum using your hardware. Method 2: Mount one tom on each bass drum and mount up to two additional toms on a stand in between the bass drums. Method 3: Mount as many toms as you want on a rack placed in front of the kit. Attach your other desired cymbals to their stands.

Where should a double kick pedal go?

So, how do you set up a drum set with a double bass pedal? The traditional setup is to attach the primary pedal to the bass drum as you would a single pedal and to place the second, slave pedal just to the right of the hi hat stand’s pedal board.

How does a double kick pedal work?

In order to play “doubles” on the pedal, drummers can employ 3 main techniques: slide, swivel, or heel-toe. In the slide technique, the pedal is struck around the middle area with the ball of the foot. As the drum produces a sound, the toe is slid up the pedal.

You might be interested:  Often asked: What Size Double Bass?

Should I buy a double bass pedal?

Double Pedal is rarely a necessity unless you’re playing the extreme forms of metal. Still, if you ever hear tasteful use of double bass playing it can make you want to get one.

How far should the beater be from the bass drum?

I’d recommend starting by placing your bass drum pedal into position (there’s usually a slot under your bass drum. Then measure a distance of about 3 inch (about 8 cm) or have your beater set at an angle that’s about 45°.

What is a double bass drum pedal?

Today, the popular alternative to lugging around two separate bass drums is playing one drum with a double bass drum pedal. This feat in pedal technology works just like a regular pedal except that a second base plate is attached by a rod to a separate beater mechanism, which operates alongside the primary beater.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *